BidetKing Crown Bidet Seat Review: Is It Worth It in 2026?

Hey guys. The Crown is the first bidet seat Bidet King has sold under its own name. That matters because Bidet King also owns Alpha Bidet, whose seats I’ve lived with for years. The Crown runs about $429, comes in white, and is available in both round and elongated sizes.

For most people with a round toilet who want endless warm water and a strong spray, the BidetKing Crown is the seat I’d pick, since Bidet King rates its rear spray at up to 1 L/min and the slimmer Alpha UX Pearl only comes in elongated. It also adds some fun extras, like a multicolor bowl light and a Party Mode. Go figure.

One honesty note before we start. I haven’t run my own tests on the Crown. The Crown numbers below come from Bidet King’s spec sheet, and anything I carry over from my Alpha seats is labeled. Since the Crown is Bidet King’s house product, buying it from Bidet King means the warranty and support come straight from the company that designed it. You can check current prices here (affiliate link).

Crown Specs at a Glance

The BidetKing Crown bidet toilet seat packs tankless heating, a 1 L/min rear spray, and a 4-inch rear profile into a $429 package with a 3-year warranty. Everything in the table comes from Bidet King’s published listing.

Quick Summary Table

Spec	BidetKing Crown
Price	About $429
Sizes	Round and elongated (white)
Water heater	Tankless, endless warm water
Rear spray volume	Up to 1 L/min, aerated
Wash modes	Rear, Rear+, Front
Nozzle	Arced stainless steel, self-cleaning
Dryer	Warm air, adjustable temp
Heated seat	Yes, adjustable temp
Rear height	4 inches
Weight rating	320 lbs
Lid	Sittable
Remote	Wireless, backlit, circular, wall mount
Presets	2 users
Nightlight	Multicolor in-bowl LED
Party Mode	30-second light routine
Deodorizer	Yes
Warranty	3-year residential limited

A couple of rows deserve a second look. The 1 L/min rear spray is about as much volume as you’ll find on a bidet toilet seat, and the 4-inch rear height is lower than the 4.5 inches on the UX Pearl.

On the warranty, year one covers 100% of parts and labor, year two covers 75%, and year three covers 50%. Bidet King also sells an optional 5-year full warranty for $99. The seat is certified to UPC, ASME A112.4.2, UL 1431, and CSA standards, so it’s cleared for both residential and commercial installs.

What Is the Crown, and Who Is It For?

The Crown is a luxury bidet seat for people who want top-tier spray volume, round or elongated fit, and a few personality touches. It lands between the Alpha JX2 and the UX Pearl on price, and it borrows ideas from both.

Bidet King’s House-Brand Seat

BidetKing has been selling bidets in the US for over 15 years. The company also owns Alpha Bidet, so the Crown is a sibling to the Alpha line and not a competitor from some random brand.

You can see the family resemblance. The arced stainless nozzle, two user presets, and slim profile all echo the UX Pearl. The tankless heater and one-touch auto mode show up on the JX side too.

What’s new is the personality: the multicolor bowl light, the halo remote, Party Mode, and a punchier Rear+ spray. Bidet King pitches it as its most “user-centric” luxury bidet seat, built to fix common gripes with electric bidets like dark remotes and seats that slope up in the back.

Who Should Consider It Over an Alpha Seat?

Here’s how I’d sort it out:

• Round toilet owners. The UX Pearl is elongated only. The Crown gives you a similar slim, preset-equipped seat in round.
• People who want the strongest rear wash. If the spray on your current seat feels weak, the 1 L/min rating is the headline feature.
• Anyone who’s had trouble with constipation. Rear+ is built for a more focused, stimulating stream.
• Night owls. The backlit remote and color-adjustable bowl light make dark bathroom trips easier.

If you want the lowest price with tankless heat, the JX2 at about $389 is still the value move. If you have an elongated bowl and care most about the dryer and deodorizer, the UX Pearl is the better fit. For more on how I weigh those trade-offs, my bidet buying guide covers the basics.

How Strong Is the Cleansing Spray?

Bidet King rates the Crown’s rear spray at up to 1 L/min at full blast, which puts it at the top of electric bidets for volume. You get two rear modes and a separate front wash.

Rear Wash Volume and Aerated Spray

According to the spec sheet, the standard rear spray is aerated. That means air gets mixed into the water stream, which makes each droplet feel bigger and softer while using the same amount of water.

From my Alpha seats (JX and UX Pearl), I can tell you volume is what decides whether a bidet cleans in one pass or three. Pressure alone can sting. Volume plus aeration feels full and thorough. The JX and UX Pearl were my best performers, and the Crown’s rating sits at or above them on paper.

A quick tip from years on Alpha seats: start at medium pressure and work up. At max, a strong seat can feel like a lot the first week.

Rear+ and the Gentler Front Wash

Rear+ switches to a more focused stream without the aeration. Bidet King says it can help “persuade stubborn bowel movements,” and adds “your mileage may vary.” I appreciate the candor.

This is a known trick with bidets. A concentrated warm stream stimulates the area and helps some people go. It won’t replace fiber, but it’s a useful option to have.

The Front wash comes out of a different part of the nozzle tip. It’s much gentler and angled for feminine hygiene. If splashing worries you, my piece on whether bidets splash water everywhere explains why positioning helps most.

Does the Warm Water Last?

Yes. The Crown uses a tankless heater that warms water on demand, so the warm water doesn’t run out mid-wash. Bidet King calls it “endless warm water,” and with tankless bidet seats that description holds up.

Tankless Heating for Longer Washes and Multiple Users

Older storage-tank seats hold a small reservoir of heated water. Once it’s gone, you get cold water, which is a nasty surprise. Tankless seats heat the water as it passes through, so a long session or back-to-back users don’t drain anything.

From my own Alpha experience, the JX’s tankless heater was the best warm-water performer in the lineup, and the UX Pearl was close behind. I can’t give you a Crown temperature reading because I haven’t measured one, and Bidet King doesn’t list a max temp in the listing. For reference, the UX Pearl’s max is limited to 102°F.

Here’s where tankless pays off in a real house:

• Families: three or four people in the morning, no waiting for a tank to recharge.
• Long washes: Rear+ sessions or oscillating cleanses can run a while without the water going cold.
• Colder months: incoming water is colder in winter, and an instant heater handles that better than a small tank.

If you’re new to how this works, my explainer on how warm water bidets work walks through tank vs. tankless in plain terms. Adjustable water temp is on the remote, so you can dial it down if you prefer lukewarm.

Design, Seat Comfort, and Dimensions

The Crown is one of the slimmest toilet seat bidet designs sold, at just 4 inches tall in the rear. It also has a flat seat and a high weight rating, which fixes two of my biggest complaints with older seats.

The 4-Inch Rear Profile and Flat Seat

Bidet King says the Crown is “slimmer than just about any bidet seat on the market.” At 4 inches, it beats the UX Pearl’s 4.5 inches, which was my previous slimmest seat.

Why care? Bulky bidet seats look like a plastic box bolted to your toilet. A thin profile reads like a normal seat and fits modern bathrooms better.

The seat surface doesn’t slope up at the rear. On older seats, that slope pushes you forward and shrinks your sitting area. The UX Pearl had a minimal slope and I noticed the extra room right away, so I expect the Crown’s flat design to feel similar.

Weight Rating and Sittable Lid

The Crown is rated to 320 lbs. That covers most adults and gives some peace of mind for bigger users.

The lid is sittable too. That sounds minor until you’re clipping a kid’s nails or tying your shoes in the bathroom. On some cheaper seats, the lid is thin plastic over electronics and isn’t meant to hold weight. On my sittable Alpha seats, I use the lid as a stool all the time.

Will It Fit Your Toilet?

The Crown fits two-piece toilets and most one-piece toilets in either round or elongated, with French-curve designs as the main exclusion. You’ll also need a water line and a nearby outlet.

Round, Elongated, and French-Curve Fit

First, figure out your bowl shape. Bidet King’s fitment guide says elongated bowls measure more than 18 inches from the center of the bolt holes to the front of the bowl. Round bowls measure about 16.5 to 17.5 inches.

Next, check your toilet type:

• Two-piece toilets: virtually all bidet toilet seats fit these.
• One-piece toilets: fine if the bowl meets the tank at close to 90 degrees.
• French-curve toilets: if the tank curves down into the bowl on a slope (the Kohler Rialto and San Raphael are common examples), the Crown is listed as excluded.

Bidet King also notes most bidet seats need about 1.75 inches from the bolt hole centers to the front of the tank. If you’re unsure, my guide on how to measure a toilet for a bidet shows each measurement, and this piece on skirted toilets helps if your toilet has smooth sides.

Water Connection and GFCI Outlet Requirements

Installation follows the standard bidet seat routine. You add a T-valve to the toilet’s water supply, run a hose to the seat, mount the bracket, and slide the seat on. On my Alpha seats, that takes well under an hour with basic tools.

The power piece trips people up. The Crown needs a grounded outlet within reach of the toilet, and a GFCI outlet is the safe choice anywhere near water. Plenty of older bathrooms don’t have one beside the toilet, so budget for an electrician if needed. My article on whether you can install a bidet on any toilet covers that and other gotchas.

Which Spray Settings Can You Adjust?

Nearly everything about the spray is adjustable on the Crown, from nozzle position to pressure and temperature. The spec sheet lists oscillation, pulse, and three wash modes, all controlled from the remote.

Oscillation, Pulse, and Nozzle Position

Here’s how the controls work according to Bidet King’s demo:

• Oscillation: press Rear or Front a second time during a wash, and the nozzle sweeps back and forth for wider coverage.
• Pulse spray: alternates between stronger and softer water flow for a massaging effect.
• Nozzle position: the left and right arrow buttons move the nozzle forward or back.

Nozzle position is the setting I tell everyone to fiddle with first. Everyone sits a little differently, so the default spot rarely lands perfectly. Spend the first few days moving it until it’s right, then save it as a preset.

Water Pressure and Temperature Controls

Pressure uses plus and minus buttons, and water temperature has its own Water Temp button. Bidet King doesn’t publish the number of levels for each, so I won’t guess.

For comparison, my UX Pearl offers six settings for pressure and temperature. That’s plenty to find a sweet spot. My usual advice:

1. Start with water temp in the middle.
2. Start pressure low to medium.
3. Bump pressure up one step at a time over a week.
4. Save what works to your preset.

The Crown’s spray ceiling is higher than most seats, so give yourself room before jumping to max.

Nozzle Hygiene and Odor Control

The Crown’s arced stainless steel nozzle rinses itself before and after every wash, and a built-in deodorizer handles smells. Both features take care of the “is this gross?” question most first-timers ask.

Stainless Steel Nozzle and Self-Cleaning Cycle

Stainless steel resists buildup and is easy to wipe clean. The arced shape is something I know from the UX Pearl. It gives the nozzle a greater range of motion and helps keep spray from splashing back onto the tip.

The self-clean runs automatically before and after each wash cycle. Fresh water rinses the nozzle, so the part that touches the spray stays clean between users.

You’ll still want to wipe the nozzle down every few weeks. A soft cloth and mild soap work fine. My complete guide to cleaning a bidet covers the full routine, and you can compare models in my roundup of the best self cleaning bidets.

Deodorizer

The Crown includes a deodorizer, which pulls air from the bowl area and neutralizes odors while you’re seated. Bidet King doesn’t detail the deodorizer’s filter type in the listing.

From my experience with the UX Pearl’s catalytic deodorizer, a good one makes a noticeable difference in a small bathroom. It removes odors instead of masking them with scent. Expect it to help, but crack a window or run the fan after a big one.

Is the Multicolor Night Light Useful?

The color-adjustable night light is useful, while Party Mode is a gag you can ignore. Bidet King calls the multicolor in-bowl LED an industry first.

Choosing an In-Bowl Color

A soft night light in the bowl lets you aim at 2 a.m. without flipping on the overhead light and waking yourself up. I use bowl lights on my Alpha seats every night, and they’re one of those features you miss fast when they’re gone.

The Crown lets you pick any color. That has real value. Warm colors like red and amber are easier on your eyes at night and won’t blast you awake the way bright white does. A dim red works great for a hallway bathroom kids use at night.

You can also match it to your bathroom or mood. “Feeling blue?” is literally in the marketing copy.

What Party Mode Actually Does

Party Mode is a 30-second disco light routine in the bowl. Bidet King describes it as “a light show from between your legs,” and I couldn’t phrase it better.

It’s a gimmick. It doesn’t improve cleaning, and you’ll probably show it to every guest once and then forget it exists. If your kids are potty training, it might make the toilet less scary. Otherwise, it costs you nothing to ignore.

Remote, Presets, and One-Touch Operation

The Crown’s controls are easy to use in the dark and quick for guests or older family members. Between the backlit remote, two presets, and one-touch auto mode, you rarely need to hunt through buttons.

Backlit Circular Remote

The wireless remote is round, with a halo light and backlit button symbols. Bidet King says a backlit remote was its number one most requested feature, and I believe it. Unlit remotes are hard to read at night.

It mounts on the wall, so it stays put and doesn’t end up in a drawer. The labeled buttons (Rear, Rear+, Front, Dry, Water Temp, plus arrows and plus/minus) are straightforward. On my UX Pearl, the side knob takes some getting used to. The Crown’s layout looks more beginner-friendly.

Two User Presets, Auto Wash and Dry, and Eco Mode

Two user presets save your favorite settings, like water pressure, temperature, nozzle position, and seat temp. In a two-person house, each of you taps your button and you’re done.

One-touch auto wash and dry runs a full wash followed by the dryer. That’s great for guests, kids, and older relatives who don’t want to learn the remote.

Eco mode (listed as power saving mode) cuts energy use when the seat sits idle. There’s also a seat sensor, so the spray won’t run unless someone is seated.

Heated Seat and Warm Air Dryer

Both the heated seat and the air dryer have adjustable temperatures. The heated seat earns its keep every winter, and the dryer works with realistic expectations.

Adjustable Comfort Settings

The heated seat takes the shock out of cold mornings. Once you’ve used one, a cold seat feels like a punishment. Turn it down or off in summer, since it adds to energy use.

The dryer temperature uses plus and minus buttons on the remote. Bidet King doesn’t list specific temperatures, so I’ll leave numbers out.

Realistic Dryer Expectations

Here’s the honest part: bidet air dryers take a couple of minutes. Every seat I’ve owned works this way, including my favorite, the UX Pearl, which has the strongest airflow in the Alpha lineup.

Fan power matters more than heat. High heat on a weak fan just gets uncomfortable. Bidet King doesn’t publish airflow numbers for the Crown, so I can’t compare it directly to the Pearl.

My routine: run the dryer for a minute or two, then pat dry with one or two squares of toilet paper. You still save a ton of TP. If you want to go fully paper-free, plan on a longer dry.

What Should You Expect From Energy Use?

Expect low energy use, since tankless seats don’t keep a reservoir of water hot all day. Bidet King doesn’t publish kWh figures for the Crown, so I’ll share what I’ve seen on its closest sibling.

Tankless Standby Use vs. a Labeled UX Pearl Estimate

Storage-tank bidets heat water around the clock. Tankless seats only heat water during a wash, so the idle draw stays small.

These are UX Pearl numbers, not Crown numbers. With eco mode on, my UX Pearl idled at about 1.8 to 2.0 watts. That works out to roughly 1.3 kWh per month for standby, plus under 1 kWh per user per month for washing. In dollars, it came to about 30 to 70 cents a month for one to four people.

The Crown shares the tankless design and eco mode, so I’d expect it to land in a similar low range. Your actual number depends on:

• Whether you leave the heated seat on full
• How long you run the dryer
• How many people use it daily
• Whether eco mode is on

Even with the heated seat running, a tankless seat costs a few dollars a month at most, which is far less than the toilet paper it replaces.

Crown vs. Alpha JX2 vs. Alpha UX Pearl

The Crown makes the most sense if you need a round seat or the strongest spray; the JX2 wins on price, and the UX Pearl wins for elongated bowls focused on drying and odor control. All three come from the Bidet King family, so support quality is similar.

Price and Feature Comparison Table

	BidetKing Crown	Alpha JX2	Alpha UX Pearl
Price	~$429	~$389	~$459
Sizes	Round, elongated	Round, elongated	Elongated only
Water heater	Tankless	Tankless	Tankless
Rear height	4 in	Not listed	4.5 in
Nightlight	Multicolor	LED	White, auto
Standout	1 L/min spray	Lowest price	Strong dryer

Other well-known brands are out there, like Bio Bidet and TOTO. You can browse more of my bidet reviews if you want to compare outside the Bidet King family.

Which Seat Makes the Most Sense?

Pick the Crown if you have a round toilet and want a slim, preset-equipped seat, or if spray strength is your top priority. It also suits anyone who wants Rear+ for constipation help.

Pick the JX2 if you want endless warm water for the least money. At about $40 less, it’s the budget-friendly tankless option. For more cost-focused picks, see my list of the best bidet for the money.

Pick the UX Pearl if you have an elongated bowl and want the best dryer I’ve used, plus a catalytic deodorizer. Its strong airflow is the main reason it’s still my personal favorite.

Who Should Buy the Crown?

The Crown is the seat I’d recommend to round-toilet owners who want a luxury bidet with endless warm water and the strongest spray Bidet King sells. At about $429, it brings UX Pearl-style perks (presets, arced stainless nozzle, slim body) to round bowls, which the Pearl doesn’t offer.

Here’s my quick checklist:

• Buy it if you want a 1 L/min rear spray, Rear+, a 4-inch profile, and a 320 lb rating.
• Buy it if you like the backlit remote and color-adjustable bowl light for night use.
• Skip it if you have a French-curve toilet, since the Crown is listed as excluded.
• Consider the UX Pearl if your bowl is elongated and drying power is your priority.
• Consider the JX2 if you want tankless heat at the lowest price.

The 3-year residential warranty (100% the first year) and optional $99 5-year full plan come directly from Bidet King, the company behind the Crown. Measure your bowl, confirm you have an outlet near the toilet, and you’ll know within a few minutes whether the Crown fits your bathroom. There you have it.

Ready to order? You can check current prices on the BidetKing Crown Bidet Toilet Seat at Bidet King here (affiliate link). Buying direct from Bidet King gets you the full warranty and their support team.