Bidets are bathroom fixtures used to wash one’s backside after using the toilet.
They can also be used as an alternative to bathing or showering for people who find it difficult to stand up and bathe due to illness, disability, injury, pregnancy, old age, etc.
Read on to discover the process of installing a bidet.
We’ll cover each step in the process, and what types of bidets are available on the market.
We will discuss how bidets work and some special circumstances that may come up when installing a bidet.
Where Do I Start When Installing A Bidet?
The first step is finding the right location for the product. Make sure there will be enough room in this area, too, as a cramped space may cause installation errors. (Link)
To start installing a bidet, remove the package containing your newly purchased bidet, go ahead and set it down on an empty toilet seat to ensure its size is perfect. Carefully peel back the protective film around all of the edges of your bidet until it peels off completely.
Be careful not to scratch any surfaces with this plastic coating. Ensure that the bidet is installed on a level, stable surface.
Trying to install bidets on carpet or linoleum can result in tilting issues and malfunctions.
How Do I Install My Bidet?
Remove the bidet from its package and place it onto your surface of choice, following all guidelines provided on installation instructions. It’s essential to follow them as they will help ensure water does not leak through gaps between parts or seep through the screws when tightened.
To Install Your Bidet:
- Turn off the water supply
- Remove the toilet seat by unscrewing the two screws if adding a toilet seat bidet.
- Install bidet per instructions and connect the water supply
- Turn on the water supply and test the bidet.
Be sure to install new screws provided by the manufacturer in their respective places where old ones were found before securing them tightly back together again for optimal use.
Be sure there is no slack left dangling anywhere once finished installing, so it does not interfere with the water’s ability to flow properly during usage (use a ruler if necessary).
Do I Need To Turn Off The Water Supply Before Installing A Bidet?
A bidet is a device that can be used as an alternative to using toilet paper. A bidet may include features such as heated water, a dryer, and cleaning jet streams.
Whether you’re installing one for your home bathroom or upgrading your current restroom at work, it’s essential to understand if the bidet will connect straight to the cold-water supply line or require its own dedicated hot-water pipe from the boiler system.
Bidets will require you to turn off the water supply before installation, no matter what type of bidet you have. If you are installing a bidet in your home, it’s best to turn off the main water supply valve so that there is not a chance of any cross-contamination.
If you have an existing bidet with no dedicated hot-water pipe and it connects to cold water, then be sure to shut off both the cold and hot valves before attempting installation.
How Do I Remove A Toilet Seat To Install A Bidet?
A bidet can be installed in the home with little hassle, but you will need some basic DIY skills and tools for this task. You’ll also want to find out whether your existing toilet seat fits bidets before installing one.
Remove the toilet seat with your hands or by using pliers. Once done, place it upside down on top of the bidet you want to install. Make sure there are no gaps between the bidet and the bottom of the toilet seat before securing them together at each end with screws.
Check to make sure the bidet is secure and tight, then place the toilet seat over the top of the bidet for use.
Replace your old toilet seat when you’re done using bidets at home if they are compatible!
How Do I Reconnect The Water Supply After A Bidet Is Installed?
Bidets should be reconnected to a water supply hose and plugged back into an electrical outlet if necessary (if so equipped with a power adapter), after installation.
To reconnect your water supply to your bidet, plug one end of the rubber hose into your bidet outlet and then attach the other end to an available water supply source. For added security, make sure to wrap plumbing tape along crescent-shaped cutouts of each screw head to prevent water from seeping in.
It is also good for the bidet user to test with water after installation before closing any walls or floors over it.
If you discover leaks from your bidet’s supply line, then use Teflon tape on all connections.
If the bidet has been turned off manually recently or at all during this guide, turn the switch knob clockwise until it clicks from “Off” to “On.”
The blue indicator light should come on once successfully flipped over.
Tips For Installing A Bidet
Use diagrams in the guide when installing your bidet, as they provide detailed instructions for adjusting basic settings.
Ideally, a bidet should be installed in an area with a water supply line and drain or access to plumbing connections (i.e., bathroom).
Here Are Some Additional Tips For Installing A Bidet:
- You’ll need about two hours for installation tasks.
- Make sure your toilet bowl has been thoroughly cleaned before installing your bidet.
- All components must be fully assembled securely during installation.
When installing the bidet seat onto the toilet bowl, line up the guide rail with one of two guide holes located on either side of your toilet’s rim. This will help you line it up properly and secure it to a fitting angle for comfort.
What Types Of Bidets Are There?
Research which types of toilet seats will best suit your needs and specifications. There are many different types, so make sure you choose carefully before purchasing one!
Some considerations include size (will it fit with my bathroom’s plumbing?), color, material, etc.
There Are Three Types Of Bidets Available:
- Ceramic or Stand-Alone Bidets.
- Spray or Handheld Bidets.
- Toilet Seat or Built-in Bidets.
When finding the right product for yourself, go ahead and purchase it from an authorized dealer or seller who provides warranties on their products.
Ensure it has everything required by law to be sold as a new item, including accompanying instructions and paperwork. This usually includes original manufacturer packaging too!
The decision of which type to purchase is based on preference and what you need for your home, but it’s always a good idea to look at reviews before making any purchases because there are many differences in each one!
What Are Ceramic Stand-Alone Bidets?
Stand-alone bidets are bidets that are not integrated into the toilet. They can be installed in place of a toilet, but they must be connected to a water supply and drain system. (Link)
Stand-alone bidets can be installed anywhere in your home without needing plumbing connections for hot/cold water supply lines from the sink or bathtub faucet valves. They require electricity plus an outside cold water hose connection instead.
The installation process will vary depending on where you want to install it as well as which bidet model you purchase but most installations take less than half an hour including:
- Plumbing water line connections (if necessary)
- Tubing running for cold water supply lines
- Attaching bidet onto existing mounting hardware using provided bolts and nuts
- Connecting a bidet to the cold water supply line
Be sure to test your stand-alone bidet and make necessary adjustments before applying a protective coating or finishing touches.
What Are Handheld Bidets?
These types of bidets come in handy when space is limited, such as an RV or boat, but if you do have the room available, it’s always best to go higher-end than lower-end due to the materials used on them!
Spray or Handheld Bidets are the most popular type of bidet on the market. They are typically used in conjunction with toilet paper and are powered with batteries. Handheld bidets are great for camping trips.
You will want to keep these bidets dry at all times since they’re electronic so store them somewhere safe from water leaks or other hazards. Most models won’t work if there’s moisture present within their battery compartment either – just something to think about before purchase.
Handheld Bidets can be a little messy to use, but they’re very convenient and easy to keep away from prying eyes when traveling or camping. Spray Bidets don’t require any mechanical parts, making them great for RV owners since there is no need for plumbing installation.
What Are Toilet Seat Bidets?
Toilet seat bidets are a prevalent choice for those who don’t want to install anything on their toilet but still enjoy the benefits of bidet use. These seats work with existing plumbing and can be installed in just minutes! (Link)
Toilet seat bidets are installed on your existing toilet, right on top of the seat. They typically come complete with an adjustable spray nozzle that is perfect for targeting hard-to-reach areas and washable heating water heater features.
How Do Bidets Work?
There are many different types of bidets available on the market these days, including handheld models like those which might attach to your current toilet seat. Some are installed permanently next to toilets either above or below. Others come built-in with seats already fitted into place – all you would need then is to turn the water supply on.
The way bidets work is by using a small jet of running water to cleanse and wash away waste from your private parts. This replaces the use of dry toilet paper, which can be pretty uncomfortable if you don’t have enough time or energy to clean yourself properly after going to the bathroom.
They are suitable for people with mobility issues that make it difficult or impossible for them to get up off their bottoms, such as those who may suffer from MS (Multiple Sclerosis), Cerebral Palsy, etc.
Do I Need A Plumber To Install A Bidet?
A plumber can guide you through the installation process. They’ll be able to tell what kind of equipment and parts are needed for the job, so there aren’t any surprises when it comes time to cover costs with retail stores or online retailers.
You do not need a plumber to install toilet seat bidets, as they are attached to existing fixtures. If you are unfamiliar with plumbing, you may need a plumber if you plan on installing a stand-alone bidet.
You’ll need a plumber if you plan on installing a stand-alone bidet. It needs:
- Plumbing connections for drainage
- Hot water supply pipes
- Cold water supply pipe before installation begins.
If there isn’t any plumbing available near the bidet, you will have to install a separate drain and supply line for it. You’ll also want to make sure that any plumbing line extensions are done correctly.
Direct connections should always be made as close as possible to the original pipe without fittings between them. Too many fittings can cause back pressure, which could lead to:
- Water leaks at joints
- Valves
- Flanges
If your toilet is older than ten years, there may be issues with installing a bidet on it because of changes in size or shape during those ten years. In this case, you would need to replace your old toilet before installing the new one.
Conclusion
Bidets are an excellent option for those who find it difficult to bathe or shower.
They can be used as an alternative if one cannot stand up due to disability, injury, pregnancy, etc.
If you’re looking for something gentler on your skin than soap and water but don’t want to use chemicals like harsh soaps and detergents, which might irritate sensitive areas of your body, then a bidet may be right for you.
Installing a bidet can be a simple or complex task depending on the type of bidet you have.
The installation process can vary but generally starts with removing the toilet seat and any components in its way. A plumber is not typically necessary for this task as it does not involve high pressures being applied while doing installations like these.
After removing the old components, you will need to attach your new parts by following instructions from guidebooks or videos packaged with them.